Nuolatinis magnetas AlNiCo is an lydinys iš geležies in kuri aliuminis, nikelis, kobalto, ir a mažas kiekis kitas magnetinis stiprinantis ingredientai are pridėta in papildo į geležis.AlNiCo alloy has high coercivity and high Curie temperature. AlNiCo ring magnet is hard and brittle and cannot be cold worked. It must be made by casting or sintering process. AlNiCo can produce a magnetic field of up to 0.15 Tesla. For an example of an intermediate anisotropic cast Al nickelco alloy, the composition of AlNiCo-6 is 8 percent Al, 16 percent Ni, 24 percent Co, 3 percent Cu, 1 percent Ti, and the rest are Fe. AlNiCo-6 has a BHmax of 3.9 megagauss-oesteds (MG·Oe), a coercivity of 780 oersted, a Curie temperature of 860 degree , and a maximum operating temperature of 525 degree .Before the discovery of rare earth magnets in the 1970s, AlNiCo was the strongest material for permanent magnets.

AlNiCo ring magnet has the advantages of high remanence (up to 1.35T), low coercivity (paprastai less than 160kA/m) and nonlinear demagnetization curve, so AlNiCo ring magnet is easy to be magnetized, but also easy to demagnetize. Special attention should be paid to its particularity in the design and manufacture of magnetic circuit of devices, and the magnet must be stabilizuota in advance. It is griežtai draudžiama į kontaktą su bet kokia feromagnetine medžiaga metu use, so as not to cause local irreversible demagnetization or distortion of flux density distribution.

Tarp visų nuolatinių magnetų medžiagų, AlNiCo žiedas magnetas has žemiausias grįžtamas temperatūra koeficientas. AlNiCo žiedas magnetas turi gerai temperatūra stabilumas ir senėjimas stabilumas, ir is tinkamas for gamyba instrumentai, varikliai, elektroakustiniai prietaisai, magnetinės mašinos, etc.

Privalumai & Trūkumai AlNiCo Magnetai

Privalumai

• Cast Alnico offers a near net shape. Cast alnico can be made to complex shapes with complex magnetic patterns.

• Alnico Br as high as NdFeB at room temperature.

• Can be used up to 450-550 degrees C (842-932}F).

• Can be cast in labai dideli dydžiai.

Trūkumai

• Sukepintas AlNiCo is paprastai ribotas to mažas to vidutiniai dydžiai ir paprastesnės formos.

Tipiškas magnetinis našumas sukepintas sukepintas AlNiCo magnetas

Klasės	Remanencija		Prievarta Jėga		Maks Energija		Tankis	Panašus MMPA Standartas	Temp. Coeff. of Br	Curie Temp.	Maks. Darbo Temp.
	Br						Tankis		Temp. Coeff. of Br	Curie Temp.	Maks. Darbo Temp.
	Mt	Gs	KA/ m	Oe	KJ/m³		g/cm³		procentas / laipsnis	laipsnis	laipsnis
*FLN8	520	5200	40	500	8	1.00	6.7	AlNiCo 3	-0.022	760	450
*FLNG12	700	7000	40	500	12	1.50	7	AlNiCo 2	-0.014	810	450
*FLNG14	570	5700	76	950	14	1.75	7.1	AlNiCo 4	-0.02	850	450
*FLNG18	560	5600	88	1100	18	2.25	7.2	AlNiCo 7	-0.02	850	450
FLNG26	900	9000	56	700	26	3.25	7.2	AlNiCo 6	-0.02	850	450
FLNG28	1050	10500	46	580	28	3.50	7.2	AlNiCo 5	-0.016	850	450
FLNGT31	780	7800	104	1300	31	3.90	7.2	AlNiCo 8	-0.02	850	450
FLNG34	1100	11000	50	630	34	4.30	7.2	AlNiCo 5	-0.016	890	450
FLNGT36	680	6800	135	1700	36	4.50	7.2	AlNiCo 8	-0.011	850	450
FLNGT38	800	8000	123	1550	38	4.75	7.2	AlNiCo 8	-0.02	850	450
FLNGT42	880	8800	122	1530	42	5.25	7.2	AlNiCo 8	-0.02	850	450
FLNGT33J	700	7000	140	1750	33	4.13	7.2	ALNICO8HC	-0.025	850	450

*=Isotropic Other=Anisotropic

Tipiškas Magnetinis Našumas Už Balsas AlNiCo

	Remanencija		Prievarta Jėga		Maks Energija		Tankis	Panašus MMPA Standartas	Temperatūra Koeficientas		Curie Temp. laipsnis	Maks. Darbas Temp.
	Br		Hcb		(BH)max		Tankis		Temperatūra Koeficientas
		Gs	KA/m	Oe	KJ/ m³	MGOe	g/cm³		procentas / laipsnis Br	procentas / laipsnis Hcb
*LN9	680	6800	30	380	9.0	1.13	6.9	AlNiCo 3	-0.03	-0.02	810	450
*LN10	600	6000	40	500	10	1.25	6.9	AlNiCo 3	-0.03	-0.02	810	450
*LNG12	720	7200	45	570	12.4	1.55	7	AlNiCo 2	-0.03	-0.02	810	450
*LNG13	700	7000	48	600	12.8	1.6	7	AlNiCo 2	-0.03	-0.02	810	450
LNG37	1200	12000	48	600	37	4.65	7.3	AlNiCo 5	-0.02	0.02	860	525
LNG40	1250	12500	48	600	40	5.0	7.3
LNG44	1250	12500	52	650	44	5.5	7.3
LNG52	1300	13000	56	700	52	6.5	7.3	AlNiCo 5 DG
LNG60	1350	13500	59	740	60	7.5	7.3	AlNiCo 5-7
LNGT28	1100	11000	58	720	28	3.5	7.3	AlNiCo 6	-0.02	0.03	860	525
LNGT36J	700	7000	140	1750	36	4.5	7.3	AlNiCo 8 HC	-0.025	0.02	860	550
*SGDT18	580	5800	100	1250	18	2.25	7.3	AlNiCo 8	-0.025	0.02	860	550
LNGT32	800	8000	100	1250	32	4.0	7.3	AlNiCo 8	-0.025	0.02	860	550
LNGT38	820	8200	110	1380	38	4.75	7.3
LNGT44	880	8800	120	1500	44	5.5	7.3
LNGT60	900	9000	110	1380	60	7.5	7.3
LNGT72	1050	10500	120	1500	72	9	7.3	AlNiCo 9	-0.025	0.02	860	550
LNGT44J	820	8200	144	1800	44	5.5	7.3	AlNiCo 8 HE	-0.025	0.02	860	550

*=Isotropic Other=Anisotropic

Populiarus Žymos: alnico žiedas magnetas, Kinija, tiekėjai, gamintojai, pirkti, kaina, in stock, free sample

AlNiCo Žiedas Magnetas